Kodak Reflex II - Shutter Disassemby 8/9

When you put the cover of the slow speed escapement back on, first make sure that the shutter is not cocked (the main spring should not be tensioned just like in this picture). Also make sure that the half gear at the bottom of the escapement (red arrow) is in the correct position. If it is not, the slow speed will likely be too fast (when have you ever heard that :-)

Canon PowerShot A80
ƒ/8.0
7.8 mm
0.4
Flash (off, did not fire)
Show EXIF

Upgrade to Flickr Pro to hide these ads

• Kodak Reflex II
• repair

Additional info